NMFC 50770 - Sheet Steel Blow Pipe Fittings | Class N/A

Note 50772: NOTE-Blow pipe fittings include angles, breechings, elbows, feeder spouts, gates, hangers, hoods, joints, tees, valves, Y's and similar fittings or connections.

To find the correct freight class for your shipment:

1. Confirm the tariff note for Item 50772 before you ship; list NMFC 50770 and the note on the BOL to prevent reclass.
2. Nest elbows and reducers inside larger diameters, cap sharp edges with plastic guards, and band to runners using corner protectors.
3. Bundle straight blow pipe by length with wood dunnage and two to three steel or poly straps; label bundles with piece counts for dock checks.
4. Use VCI paper or poly wrap to limit surface rust and keep bundles off the floor with pallets or skids; mark as non-hazardous metal fittings.

Note: All classifications are subject to Item 170. Verify with official NMFC publications for the most current requirements.

• Accurate NMFC and note reference minimizes reclass fees and billing disputes.
• Nesting and tight bundling cut cubic footage, lowering LTL rates and avoiding oversize charges.
• Edge protection and capped ends reduce scrape and crush damage, lowering claim risk.
• Uniform, labeled bundles speed cross-dock handling and may reduce detention or handling accessorials.