NMFC 57500 - Steel Pipe Welding Dollies | Class 70

To find the correct freight class for your shipment:

1. State the commodity clearly on the BOL: “Dollies, pipe welding, steel, other than electrical — NMFC 57500, Class 70.” This avoids reclass and inspection delays.
2. Stabilize mobility parts: lock or block casters, chock wheels, and band the dolly to a sturdy pallet. Add edge protectors under steel strapping to prevent scuffs.
3. Protect contact points and pipe cradles with corrugated pads or foam, and cap sharp steel edges. Use stretch wrap plus two steel or poly straps through the frame.
4. Load for balance: center the frame over the pallet stringers, keep stack height low, and separate multiple dollies with wood dunnage so they don’t interlock or shift.

Note: All classifications are subject to Item 170. Verify with official NMFC publications for the most current requirements.

• Predictable rating: fixed Class 70 means quoting and budgeting are straightforward, with less exposure to density-based reclass fees.
• Lower claims risk: proper blocking of casters and banding to a pallet reduces rolling and tip-over damage during cross-dock transfers.
• Simplified compliance: non-hazardous steel equipment avoids hazmat surcharges and extra paperwork, accelerating tender-to-pickup timelines.
• Operational efficiency: pallet-ready preparation lets carriers forklift quickly, cutting handling time and improving on-time performance for fab shops and field crews.